Document Text Contents
Page 2
Overview of contents
General information A
Transport and storage B
Technical data/ product description C
Set-up and assembly D
Placing the system in service / taking it out of service E
Operation / monitoring F
Malfunctions G
Maintenance H
Preserving/Cleaning the system I
Appendix
- R+I flowchart with components and spare parts list
- Circuit diagram
- Control system manual
- Operating Instructions options
Imprint
All Rights Reserved.
The edition date on the cover sheet is definitive.
Subject to technical changes.
These Operating Instructions may not be translated into foreign
languages, reprinted, saved on data media or otherwise duplicated
except with the express written approval of the manufacter.
File: BA_GB_DB_UOND43-120_0506_A.doc
Dec 12, 2006/Mü
Page 101
RO 1000 - Version 1.12 MANUAL
10.01.96 Page 24/24
5. Technical Data
The following table contains all significant technical data of the RO 1000 control.
min. type max. unit
nominal service voltage
main frequenCy
nominal voltamps
200
47
5
230
-
-
260
63
10
V
Hz
VA
ambient temperature range (operation)
ambient temperature range (storage)
relative air humidity
0
-10
15
-
-
-
50
70
85
° C
° C
%
conductivity range
- accuraCy of measurement (ref. to range end
value without sensor)
- temperature range
2
-
0
-
0.5
-
200
1
40
µS/cm
%
° C
switching current of circuit inputs
adm. relay load for 230 V AC
adm. relay load for 24 V DC
total installed load
total installed load - solenoid valves
0
-
-
-
-
-
-
-
-
-
30
4
1
1000
250
mA
A
A
VA
VA
protection class IP55
Page 102
Settings RO 1000 Control
1 Ackn.failure
2 Operat.mode STOP When various settings possible the factory
OPERATION adjustment is the first on the following
DISINFECTION menue table.
3 cy-permeate
4 temperature
5 hour meter
6 cy-limits lim: 050 µS/cm
war: 040 µS/cm
7 ps lim. exc. do no stop
do stop
8 calibration 1 temp. permeate XX.X: °C
2 cy-permeate 1 cond UNTEN XXX µS/cm
2 cond OBEN XXX µS/cm
3 calibr.-reset
9 settings 1 t-delay-LIM 05 min
2 t-del.aa-LIM 01 min
3 t-low pressure 01 s (8 s)*
4 t-press.hys 9,9 s
5 t-press.TO 60 s
6 t-disc. rinse 00 min
7 t-inter rinse 00 h
8 t-concentrate 01 min
9 t-disposal min: max:
005 s 60 min
10 t-maintenance 003500 h
11 ps-acknowl. without password
only with password
12 ps-concentrate displacement
rinse
13 ps-tank-type with overflow
no overflow
14 inputs 1 extern.stop normally opend
normally closed
2 motor ptotection normally opend
normally closed
3 pressure switch normally opend
normally closed
4 tank min not active
normally opend
normally closed
5 tank max normally opend
normally closed
15 language english
deutsch
16 syst.-reset
10 diagnostic 1 digit.input
2 digit.output * for 3-phase current/RO pump
3 lights
4 cy-permeate
5 temp.-permeate
Stand: 03.09.03/Sw, Datei: Settings RO1000.xls
Overview of contents
General information A
Transport and storage B
Technical data/ product description C
Set-up and assembly D
Placing the system in service / taking it out of service E
Operation / monitoring F
Malfunctions G
Maintenance H
Preserving/Cleaning the system I
Appendix
- R+I flowchart with components and spare parts list
- Circuit diagram
- Control system manual
- Operating Instructions options
Imprint
All Rights Reserved.
The edition date on the cover sheet is definitive.
Subject to technical changes.
These Operating Instructions may not be translated into foreign
languages, reprinted, saved on data media or otherwise duplicated
except with the express written approval of the manufacter.
File: BA_GB_DB_UOND43-120_0506_A.doc
Dec 12, 2006/Mü
Page 101
RO 1000 - Version 1.12 MANUAL
10.01.96 Page 24/24
5. Technical Data
The following table contains all significant technical data of the RO 1000 control.
min. type max. unit
nominal service voltage
main frequenCy
nominal voltamps
200
47
5
230
-
-
260
63
10
V
Hz
VA
ambient temperature range (operation)
ambient temperature range (storage)
relative air humidity
0
-10
15
-
-
-
50
70
85
° C
° C
%
conductivity range
- accuraCy of measurement (ref. to range end
value without sensor)
- temperature range
2
-
0
-
0.5
-
200
1
40
µS/cm
%
° C
switching current of circuit inputs
adm. relay load for 230 V AC
adm. relay load for 24 V DC
total installed load
total installed load - solenoid valves
0
-
-
-
-
-
-
-
-
-
30
4
1
1000
250
mA
A
A
VA
VA
protection class IP55
Page 102
Settings RO 1000 Control
1 Ackn.failure
2 Operat.mode STOP When various settings possible the factory
OPERATION adjustment is the first on the following
DISINFECTION menue table.
3 cy-permeate
4 temperature
5 hour meter
6 cy-limits lim: 050 µS/cm
war: 040 µS/cm
7 ps lim. exc. do no stop
do stop
8 calibration 1 temp. permeate XX.X: °C
2 cy-permeate 1 cond UNTEN XXX µS/cm
2 cond OBEN XXX µS/cm
3 calibr.-reset
9 settings 1 t-delay-LIM 05 min
2 t-del.aa-LIM 01 min
3 t-low pressure 01 s (8 s)*
4 t-press.hys 9,9 s
5 t-press.TO 60 s
6 t-disc. rinse 00 min
7 t-inter rinse 00 h
8 t-concentrate 01 min
9 t-disposal min: max:
005 s 60 min
10 t-maintenance 003500 h
11 ps-acknowl. without password
only with password
12 ps-concentrate displacement
rinse
13 ps-tank-type with overflow
no overflow
14 inputs 1 extern.stop normally opend
normally closed
2 motor ptotection normally opend
normally closed
3 pressure switch normally opend
normally closed
4 tank min not active
normally opend
normally closed
5 tank max normally opend
normally closed
15 language english
deutsch
16 syst.-reset
10 diagnostic 1 digit.input
2 digit.output * for 3-phase current/RO pump
3 lights
4 cy-permeate
5 temp.-permeate
Stand: 03.09.03/Sw, Datei: Settings RO1000.xls
