Document Text Contents
Page 2
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Duration : 8th July 2012 to 28th July 2012
Employer : Contracting & Trading Co. (C.A.T.) Saudi Arabia
Project : UBTG-1 Pipeline Replacement Project
Position : QC Welding Inspector (Aramco Approved)
Duration : June 2011 up to May 2012
Job Responsibilities:
Conduct weekly Tool Box meetings with welders and pipe – fitters in order to ensure
that they fully understand project requirements.
Control Base Materials, Pipe and Plates.
Implementation and Monitoring of work and processes being carried out to the
Technical Drawings / Specifications / Procedures and Instructions established within
the Production Department
Inspect and verify the dimensional accuracy and finished condition of fabricated
pipes prior to shipping from spool-yard to Job site.
Monitor installation of pipes to the pipe rack.
According to piping arrangement, monitor the piping installation fit – up per isometric
drawing approved plan by the client conduct daily inspection and monitoring
activities.
Conduct weekly meetings with welders and pipe – fitters in order to ensure that they
fully understand project requirements
Plan training session, Delivery Competency based training, maintain training
facilities developed review and analyze curriculum
Control Base Materials, Pipe and Plates.
Ensure correct storage, Handling and Conditioning of Filler Materials.
Ensure correct storage, Handling and Conditioning of Filler Materials.
Making the reports on Non-Destructive Testing Results, repairs and Defects.
Line checking and preparation of the packages for testing of piping systems.
Witness and control of Welding Procedure Tests, Welder Testing, Fabrication
inspection, Control of site welding and mechanical activities at site.
Inspection of final weld quality for Visual Defects, weld face and root appearance,
reporting the welded joints in site.
Employer : Atharaa Engineering Services LLC, Oman
Position : QC Welding / NDT Inspector
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 2 of 7
mailto:[email protected]
Page 3
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Duration : Aug. 2010 to April 2011
Job Responsibilities:
Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner &
Third Party.
Review of WPS, PQR as per client specification and conduct welder qualification
tests, witness mechanical testing and Radiography for Qualification and approval of
welder from Third Party inspector/ Client.
Witness welder qualification test for various positions and different thick
material for Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum,
as per WPS and process Issue of welder Qualification Test reports and identity card.
Stage inspection of repair activities during fit up and welding and ensure the
compliance with required standards. Evaluation of the welding joints by visual and
NDT/Quality Control activities related to shut down and maintenance of
Refinery at various occasions.
Preparation of punch list items and clearance to the next fabrication steps.
Preparation of dossier records and submitting for approval to the higher authorities.
Maintaining of all inspection reports and related documents in QA/QC dept.
Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Familiar with material ground inspection, dimensional check & documentation
Prepare inspection reports, NCR, technical queries, weekly QA/QC reports and
monthly X-Ray and repairing status.
To ensure all fabrication works are in according to approved drawing & Latest
revision.
Identification as per procedures and clearance for Radiography.
To ensure all fabrication works comply with relevant project specification &
Classification requirements.
Liaise and co-ordinate with classification surveyor & owner’s representative to carry
out inspection.
Review and submission of Final Document for Approval
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 3 of 7
mailto:[email protected]
Page 4
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Carried out of Fit-up and Visual Inspection for Various Structures such as Sub
assembly Erections
Dimension of the Structure whether it’s according to the Drawings.
Preparation of weld map, weekly and monthly welding summary (Welder Ability
Status, NDT Traceability reports, Production Reports).
Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE
reports.
Executed the entire setup process for Non-Destructive Testing.
Coordinated of the Ministry of Environment in sultanate of Oman to attain the
Radiography licence for Atharaa.
Coordinated with the Ministry of Civil defence to get the approval for transportation
required for Radiography isotopes.
Attained quotation from various agencies from sultanate of Oman, United Arab
Emirates, and India for Non-Destructive Testing (NDT) equipment.
Collate and offered feedback on the market and competitors to the Executive
Director.
Elaborated a complete and detailed Business Plan including a market survey
showing market potential, an analysis of competitors, a definition of market needs,
the recommended distribution model, the resources required and a forecasted profit
and loss.
Employed creative thinking to customize a ‘Non-Destructive Testing’ plan tailored to
Atharaa Engineering Services criteria to maximize visibility and exposure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Employer : Das Offshore Engg. Pvt. Ltd Mumbai
Position : QA/QC Engineer (Welding/NDT)
Duration : Aug. 2008 to July 2010
Job Responsibilities:
Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner &
Third Party.
Preparation of Weld Plans & Test Plans as per Drawings & Specs., of related clients
& International codes.
Inspection of welds for Pressure vessels, Heat Exchanger, Columns as per
appropriate standards and client specification.
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 4 of 7
mailto:[email protected]
Page 5
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Co-ordination with client / Third party inspectors for Inspection activities.
Issue of inspection release note.
Monitoring of welding activities, heat treatment, welding consumables.
Final Inspection and releasing Spools for Painting of Pre-fabricated Piping Systems.
Monitoring of quality control & NDT activities during fabrication.
Interpretation of weld Radiographs & other NDT's test performance like Dye. Pen.,
Magnetic, Particle, Ultrasonic Testing
Review of WPS, PQR as per client specification and conduct welder qualification
tests, witness mechanical testing and Radiography for Qualification and approval of
welder from Third Party inspector/ Client.
Witness welder qualification test for various positions and different thick material for
Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum, as per WPS
and process Issue of welder Qualification Test reports and identity card.
Stage inspection of repair activities during fit up and welding and ensure the
compliance with required standards. Evaluation of the welding joints by visual and
NDT/Quality Control activities related to shut down and maintenance of Refinery at
various occasions.
Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE
reports.
Employer : Industrial Inspection Services (IIS) Mumbai
Position : Welding Supervisor/NDT inspector
Duration : June 2006 to Aug. 2008
Job Responsibilities:
Worked as a NDT Inspector and Welding Inspector at Tarapur NPCIL (Nuclear
Power Plant Corporation of India). Shutdown Project from November 2008 to
January 2009
Worked on a Naval Ship at Mazegaon Dock Pvt. Ltd. (MDL) Project under
supervision of a French company DCNS, (Onshore) Welding and NDE Inspections
on outer frames (Weld Inspection);
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 5 of 7
mailto:[email protected]
Page 6
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
DCNS is a major player on the European and world markets for value-adding Naval
Defense System.
Review of Welding Procedure Specification and Procedure Qualification records and
follow Inspection test plan and QAP.
Fit-up checking, Review of weld parameters of SMAW, GTAW, SAW, GMAW
according to WPS. Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.)
Mumbai have done Welding Inspection and witness UT.
Worked for MRPL (Mangalore Refineries & Petrochemical Project, Mangalore)
Performed welding and NDE inspection and TG on storage tanks.
UT on Structural Joints (Weld Inspection)
Job for Amritsar Airport Project, under Pratibha Pipes and Structural Ltd.
Worked as Welding supervisor on Top and Bottom Dishends of Boilers Job for
Larsen & Toubro.
Worked as welding supervisor on Leg Support of Boilers Job for Larsen & Toubro.
Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.)
Mumbai
Performed UT and have done Welding Inspection.
Worked for Vikram Ispat (Saurashtra). Performed NDE inspection works on
pressure valves
Visits various local sites in Mumbai & Thane for Welding, NDE & Mechanical
inspection works
Interpretation of Radiographs of Weld ments against various codes, standards.
ADDITIONAL INFORMATION:
Proficiency in Microsoft Office
Operating Systems: Windows 98 / 2000 / XP
Certification in PRO-E
PERSONAL DETAILS:
Nationality : Indian
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 6 of 7
mailto:[email protected]
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Duration : 8th July 2012 to 28th July 2012
Employer : Contracting & Trading Co. (C.A.T.) Saudi Arabia
Project : UBTG-1 Pipeline Replacement Project
Position : QC Welding Inspector (Aramco Approved)
Duration : June 2011 up to May 2012
Job Responsibilities:
Conduct weekly Tool Box meetings with welders and pipe – fitters in order to ensure
that they fully understand project requirements.
Control Base Materials, Pipe and Plates.
Implementation and Monitoring of work and processes being carried out to the
Technical Drawings / Specifications / Procedures and Instructions established within
the Production Department
Inspect and verify the dimensional accuracy and finished condition of fabricated
pipes prior to shipping from spool-yard to Job site.
Monitor installation of pipes to the pipe rack.
According to piping arrangement, monitor the piping installation fit – up per isometric
drawing approved plan by the client conduct daily inspection and monitoring
activities.
Conduct weekly meetings with welders and pipe – fitters in order to ensure that they
fully understand project requirements
Plan training session, Delivery Competency based training, maintain training
facilities developed review and analyze curriculum
Control Base Materials, Pipe and Plates.
Ensure correct storage, Handling and Conditioning of Filler Materials.
Ensure correct storage, Handling and Conditioning of Filler Materials.
Making the reports on Non-Destructive Testing Results, repairs and Defects.
Line checking and preparation of the packages for testing of piping systems.
Witness and control of Welding Procedure Tests, Welder Testing, Fabrication
inspection, Control of site welding and mechanical activities at site.
Inspection of final weld quality for Visual Defects, weld face and root appearance,
reporting the welded joints in site.
Employer : Atharaa Engineering Services LLC, Oman
Position : QC Welding / NDT Inspector
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 2 of 7
mailto:[email protected]
Page 3
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Duration : Aug. 2010 to April 2011
Job Responsibilities:
Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner &
Third Party.
Review of WPS, PQR as per client specification and conduct welder qualification
tests, witness mechanical testing and Radiography for Qualification and approval of
welder from Third Party inspector/ Client.
Witness welder qualification test for various positions and different thick
material for Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum,
as per WPS and process Issue of welder Qualification Test reports and identity card.
Stage inspection of repair activities during fit up and welding and ensure the
compliance with required standards. Evaluation of the welding joints by visual and
NDT/Quality Control activities related to shut down and maintenance of
Refinery at various occasions.
Preparation of punch list items and clearance to the next fabrication steps.
Preparation of dossier records and submitting for approval to the higher authorities.
Maintaining of all inspection reports and related documents in QA/QC dept.
Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Familiar with material ground inspection, dimensional check & documentation
Prepare inspection reports, NCR, technical queries, weekly QA/QC reports and
monthly X-Ray and repairing status.
To ensure all fabrication works are in according to approved drawing & Latest
revision.
Identification as per procedures and clearance for Radiography.
To ensure all fabrication works comply with relevant project specification &
Classification requirements.
Liaise and co-ordinate with classification surveyor & owner’s representative to carry
out inspection.
Review and submission of Final Document for Approval
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 3 of 7
mailto:[email protected]
Page 4
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Carried out of Fit-up and Visual Inspection for Various Structures such as Sub
assembly Erections
Dimension of the Structure whether it’s according to the Drawings.
Preparation of weld map, weekly and monthly welding summary (Welder Ability
Status, NDT Traceability reports, Production Reports).
Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE
reports.
Executed the entire setup process for Non-Destructive Testing.
Coordinated of the Ministry of Environment in sultanate of Oman to attain the
Radiography licence for Atharaa.
Coordinated with the Ministry of Civil defence to get the approval for transportation
required for Radiography isotopes.
Attained quotation from various agencies from sultanate of Oman, United Arab
Emirates, and India for Non-Destructive Testing (NDT) equipment.
Collate and offered feedback on the market and competitors to the Executive
Director.
Elaborated a complete and detailed Business Plan including a market survey
showing market potential, an analysis of competitors, a definition of market needs,
the recommended distribution model, the resources required and a forecasted profit
and loss.
Employed creative thinking to customize a ‘Non-Destructive Testing’ plan tailored to
Atharaa Engineering Services criteria to maximize visibility and exposure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Employer : Das Offshore Engg. Pvt. Ltd Mumbai
Position : QA/QC Engineer (Welding/NDT)
Duration : Aug. 2008 to July 2010
Job Responsibilities:
Conduct all stage-wise Inspection as per approved QCP/ITP with Client, Owner &
Third Party.
Preparation of Weld Plans & Test Plans as per Drawings & Specs., of related clients
& International codes.
Inspection of welds for Pressure vessels, Heat Exchanger, Columns as per
appropriate standards and client specification.
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 4 of 7
mailto:[email protected]
Page 5
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
Co-ordination with client / Third party inspectors for Inspection activities.
Issue of inspection release note.
Monitoring of welding activities, heat treatment, welding consumables.
Final Inspection and releasing Spools for Painting of Pre-fabricated Piping Systems.
Monitoring of quality control & NDT activities during fabrication.
Interpretation of weld Radiographs & other NDT's test performance like Dye. Pen.,
Magnetic, Particle, Ultrasonic Testing
Review of WPS, PQR as per client specification and conduct welder qualification
tests, witness mechanical testing and Radiography for Qualification and approval of
welder from Third Party inspector/ Client.
Witness welder qualification test for various positions and different thick material for
Plate and pipe diameters for Stainless Steel, Carbon Steel, Aluminum, as per WPS
and process Issue of welder Qualification Test reports and identity card.
Stage inspection of repair activities during fit up and welding and ensure the
compliance with required standards. Evaluation of the welding joints by visual and
NDT/Quality Control activities related to shut down and maintenance of Refinery at
various occasions.
Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Familiar with the standards of ASME Section IX, ASME B31.1, ASME B31.3, AWS
D1.1, API 1104.
Reviewing of Mill Test Certificates, Radiography films, PWHT charts and other NDE
reports.
Employer : Industrial Inspection Services (IIS) Mumbai
Position : Welding Supervisor/NDT inspector
Duration : June 2006 to Aug. 2008
Job Responsibilities:
Worked as a NDT Inspector and Welding Inspector at Tarapur NPCIL (Nuclear
Power Plant Corporation of India). Shutdown Project from November 2008 to
January 2009
Worked on a Naval Ship at Mazegaon Dock Pvt. Ltd. (MDL) Project under
supervision of a French company DCNS, (Onshore) Welding and NDE Inspections
on outer frames (Weld Inspection);
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 5 of 7
mailto:[email protected]
Page 6
Al-Suwaiket Support Services
P.O.Box.4228 Al-Khobar 31952 KSA
Tel.: 03 814 6222 Fax: 03 858 0916
Email [email protected]
DCNS is a major player on the European and world markets for value-adding Naval
Defense System.
Review of Welding Procedure Specification and Procedure Qualification records and
follow Inspection test plan and QAP.
Fit-up checking, Review of weld parameters of SMAW, GTAW, SAW, GMAW
according to WPS. Monitoring & Review of Preheat/Post heat & PWHT of welds.
Monitor the storage, backing and handling of welding consumable. In accordance
with manufacturer approved procedure.
Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.)
Mumbai have done Welding Inspection and witness UT.
Worked for MRPL (Mangalore Refineries & Petrochemical Project, Mangalore)
Performed welding and NDE inspection and TG on storage tanks.
UT on Structural Joints (Weld Inspection)
Job for Amritsar Airport Project, under Pratibha Pipes and Structural Ltd.
Worked as Welding supervisor on Top and Bottom Dishends of Boilers Job for
Larsen & Toubro.
Worked as welding supervisor on Leg Support of Boilers Job for Larsen & Toubro.
Worked on bullets and pressure vessels at BPCL (Bharat Petroleum Corp. Ltd.)
Mumbai
Performed UT and have done Welding Inspection.
Worked for Vikram Ispat (Saurashtra). Performed NDE inspection works on
pressure valves
Visits various local sites in Mumbai & Thane for Welding, NDE & Mechanical
inspection works
Interpretation of Radiographs of Weld ments against various codes, standards.
ADDITIONAL INFORMATION:
Proficiency in Microsoft Office
Operating Systems: Windows 98 / 2000 / XP
Certification in PRO-E
PERSONAL DETAILS:
Nationality : Indian
Shaikh Mohammed Tabish – QA/QC Welding Inspector
Page 6 of 7
mailto:[email protected]
