Download msds aquades.pdf PDF

Titlemsds aquades.pdf
File Size72.2 KB
Total Pages9
Document Text Contents
Page 1

Page 1/9
Safety Data Sheet

according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


1 Identification of substance:

· Product details:

· Trade name: NORDIC AQUADES
· Application of the substance / the preparation Disinfectant

· Supplier/Manufacturer:
Rugtoften 47
6630 Rødding
Tel.: +45-(0)506-75852474
Fax: +45-(0)506-75852475

· Email competent person: [email protected]

· Information department: See supplier/manufacturer
· Emergency information: National Poisons Information Centre Tel.: +44 (0)870 6006266

2 Hazards identification

· Hazard description:

Xn Harmful

· Information pertaining to particular dangers for man and environment:
R 22 Harmful if swallowed.
R 37/38 Irritating to respiratory system and skin.
R 41 Risk of serious damage to eyes.

· Classification system:
The classification was made according to the latest editions of the EU-lists, and expanded using company data and specialized

3 Composition/information on ingredients

· Chemical characterization:
· CAS No. Description:

7722-84-1 hydrogen peroxide solution max 49,9 %
· Identification number(s):
· EINECS Number: 231-765-0
· EU Number: 008-003-01-6

* 4 First aid measures

· General information:
First aid personnel should pay attention to their own safety.
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may occur even after several hours; therefore medical observation is suggested for at least 48 hours after
the accident.

· After inhalation:
Remove victim from contaminated area. If breathing is difficult, give oxygen. If breathing stops, provide artificial respiration. Call a

· After skin contact:
Immediately wash with water and soap and rinse thoroughly.
Or if available rinse with Previn®.

(Contd. on page 2)

Page 2

Page 2/9

Safety Data Sheet
according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 1)


Cover wound with a sterile dressing.
Seek medical treatment.

· After eye contact:
Protect unharmed eye.
Rinse the eyes with open eyelids for 10 - 15 minutes with water.
Rinse the eyes with open eyelids for 10 - 15 minutes with water. Then consult an eye specialist immediately.
Or if available rinse with Previn® ADI oder Previn® LDP.
Treatment by an ophtalmologist

· After swallowing:
Rinse out mouth and then drink plenty of water.
Do not induce vomiting.
If vomitting occurs spontaneously:
Hold the head of the casualty low with the body in a prone position in order to avoid aspiration.
Never give anything by mouth to a unconscious person.
Immediately call an emergency physician to the place of accident.

· Information for doctor:
After inhalation oedema of the lungs may occur. Symptoms can also occur several hours after overexposure.

· The following symptoms may occur:
After skin contact:
Whitening of the skin surface
Local irritation symptoms
After inhalation:
Irritation of mucuous membranes
watering eyes
Oedema of the lungs
After swallowing:
Extreme irritation of mucous membranes
See chapter 11

· Danger:
Risk of pulmonary oedema.
If swallowed or in case of vomiting, danger of entering the lungs.

· Treatment:
In cases of irritation to the lungs, initial treatment with Dexametason metered aerosol.
Symptomatic treatment
(decontamination, vital functions)

* 5 Fire fighting measures

· Suitable extinguishing agents:
Water jet spray
Carbon dioxide (CO2)

· For safety reasons unsuitable extinguishing agents:
Direct jet water
Organic compounds

· Special hazards caused by th e material, its products of combustion or resulting gases:
Dangerous decomposition product see chapter 10: stability and reactivity

· Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.

· Additional information:
Heating leads to pressure increase entailing danger of bursting and explosion. Immediately cool neighbouring packages and
containers with sprayed water and, if possible, remove them out of the danger zone
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.

(Contd. on page 3)

Page 3

Page 3/9
Safety Data Sheet

according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 2)


Collect contaminated fire fighting water separately. It must not enter the sewage system.

* 6 Accidental release measures

· Person-related safety precautions:

Wear protective equipment. Keep unprotected persons away.

Ensure adequate ventilation
Use respiratory protective device against the effects of fumes/dust/aerosol.

· Measures for environmental protection:
Do not allow product to reach sewage system or any water course.
Do not allow to penetrate the ground/soil.

· Measures for cleaning/collecting:
Ensure adequate ventilation.
If possible without risk, isolate damaged containers.
Put damaged packagings in plastic salvage packagings. Do not use metall drums.
Do not close packagings airtight - risk of bursting by decomposition of the product.
Small quantities:
Dilute with plenty water.
Absorb with non-combustible material like sand, soil or diatomite.
Dam up larger quantities and pump into containers.
Rinse residues with water.
Send for recovery or disposal in suitable receptacles.
Dispose contaminated material as waste according to item 13.

* 7 Handling and storage

· Handling
· Information for safe handling:

Open and handle receptacle with care.
Ensure good ventilation/exhaustion at the workplace.
Keep away from heat and direct sunlight.
Prevent formation of aerosols.
Restrict the quantity stored at the work place.
Avoid contact with eyes and skin.
Avoid inhalation of vapours.
Do not refill residue into storage receptacles.

· Information about protection against explosions and fires: The product is not flammable

· Storage
· Requirements to be met by storerooms and receptacles:

Store only in the original receptacle.
Use only receptacles specifically permitted for this substance/product.
Provide for suitable venting installations on all containers.
Suitable material for containers and packaging:
VA-steel (passivated)
HDPE (Hig density polyethylene)
Aluminium (passivated)
Aluminium-magnesium-alloy (passivated)
Provide acid-resistant floor.

(Contd. on page 4)

Page 4

Page 4/9
Safety Data Sheet

according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 3)


Jointless, smooth floor and walls.
· Information about storage in one common storage facility:

Store away from foodstuffs.
Store away from feed.
Store away from flammable substances.
Do not store together with alkalies (caustic solutions).
Keep away from solvents.
Do not store together with:
Reducing agents
Metal salts
Store separately from:
Explosives (1)
Compressed, liquefied and pressurized gas (2A)
Substances liable to spontaneous combustion (4.2)
Substances which, in contact with water, emit flammable gases (4.3)
Organic peroxides (5.2)

· Further information about storage conditions:
Do not gas tight seal receptacle.
Remove packing material (wood, paper, cardboard) from the storage area.
Protect from contamination

· Storage class 5.1 B oxidizing substances (VCI)
· Specific applications Follow the directions!

* 8 Exposure controls and personal protection

· Additional information about design of technical systems: No further data; see item 7.

· Components with limit values that require monitoring at the workplace:
7722-84-1 hydrogen peroxide solution
WEL (Great Britain)

OEL (Ireland)

Short-term value: 2.8 mg/m³, 2 ppm
Long-term value: 1.4 mg/m³, 1 ppm
Short-term value: 3 mg/m³, 2 ppm
Long-term value: 1.5 mg/m³, 1 ppm

· Personal protective equipment
· General protective and hygienic measures:

The usual precautionary measures should be adhered to when handling chemicals.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Avoid contact with eyes and skin absolutely.
Do not inhale gases / fumes / aerosols.
Provide eye bath.
If larger quantities are handled provide emergency showers.

· Breathing equipment:
Not necessary if room is well-ventilated.
In case of unintentional release of substance, exceeding the occupational exposure limit value:

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.

Short term filter device:
Filter: CO NO P3

· Protection of hands:
Chemical resistant gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation

(Contd. on page 5)

Page 5

Page 5/9

Safety Data Sheet
according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 4)


Check protective gloves prior to each use for their proper condition.
After use of gloves apply skin-cleaning agents and skin cosmetics.

· Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from
manufacturer to manufacturer.

· Penetration time of glove material:
The exact break-through time has to be found out by the manufacturer of the protective gloves and has to be observed.

· For the permanent contact gloves made of the following materials are suitable:
For example protection gloves made by KCL GmbH, D-36124 Eichenzell; email: [email protected], with following specification (tested
according to EN 374):
Material: butylrubber
Thickness: 0,7 mm
Permeation time: > 480 minutes
Product name: Butoject (898)
Material: Fluorkautschuk
Thickness: 0,7 mm
Permeation time: > 480 minutes
Product name: Vitoject(890)
These recommendations are valid only for the product mentioned in this safety data sheet.

· As protection from splashes gloves made of the following materials are suitable:
Material: Polychloroprene with natural rubber
Thickness: 0,6 mm
permeation time: 30 minutes
Product name: Camapren (720)

· Eye protection:
Basket goggles (DIN EN 58211, code number 3) or face protection shield.
If vapours or aerosols arise which may injure the eyes ,
wearing of a full mask is recommended.

· Body protection:
Acid resistant protective clothing
According to hazard:

* 9 Physical and chemical properties:

· General Information

Form: Fluid
Colour: Colourless

Odour: Characteristic

light pungent

· Change in condition:
Melting point/Melting range: -52°C
Boiling point/Boiling range: 114°C

· Flash point: not applicable

· Ignition temperature:

· Decomposition temperature: > 100°C

· Danger of explosion: Product does not present an explosion hazard.

· Vapour pressure at 20°C: 12 mbar

· Density at 20°C: ~ 1.196 g/cm³
(Contd. on page 6)


Page 7

Page 7/9
Safety Data Sheet

according to 1907/2006/EC, Article 31

Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 6)


Swallowing may lead to a strong caustic effect on mouth, throat and stomach.
The decomposition beginning in the upper digestive tract with massive oxygen release can lead to severe mechanical damage to
the stomach and oesophagus. Depending on the resorbed quantity the gas formation can also extend to the vascular system (e.g.
embolism in the portal vein system), which leads to considerable circulatory disorders.

* 12 Ecological information

· Information about elimination (persistence and degradability):
· Other information:

Photochemical degradation of 50% within about 20 hours. Medium: air.
In soil and sewage water a fast reduction to oxygen and water occurs.

· Behaviour in environmental systems:
· Mobility and bioaccumulation potential: Does not accumulate in organisms
· Ecotoxical effects:
· Aquatic toxicity:

orfe LC50: 35 mg/l (100 % hydrogen peroxide)
EC0/24h 3.8 mg/l (daphnia magna)
EC10 11 mg/l (16h) (pseudomonas putida)
EC50/24h 7.7 mg/l (daphnia magna)
IC50/72h 2.5 mg/l (chlorella vulgaris)

OECD 201
LC0 17 mg/l (ictalurus punctatus)

LC50/24h 31.3 mg/l (Onchorhynchus mykiss)
LC50/96h 37.4 mg/l (ictalurus punctatus)
NOEC/72 h 0.1 (chlorella vulgaris)

OECD 201
· Additional ecological information:
· AOX-indication: The product does not contain any organic halogen compound.
· According to the formulation contains the following heavy metals and compounds from the EU guideline NO. 76/464 EC:

· General notes:

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Danger to drinking water is possible if large quantities leak into the ground or into water course.
Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water.

13 Disposal considerations

· Product:
· Recommendation:

Must not be disposed of together with household garbage. Do not allow product to reach sewage system.

Disposal according to instructions of local authorities.

· Uncleaned packagings:
· Recommendation:

Empty contaminated packagings thoroughly. They can be recycled after thorough and proper cleaning.
Packagings that cannot be cleansed are to be disposed of in the same manner as the product.
Disposal must be made according to official regulations.

· Recommended cleansing agent: water

(Contd. on page 8)

Page 8

Page 8/9
Safety Data Sheet

according to 1907/2006/EC, Article 31
Printing date: 29.08.2008 Revision: 29.08.2008


(Contd. of page 7)


14 Transport information
· Land transport ADR/RID (cross-border)

· ADR/RID class: 5.1 (OC1) Oxidising substances.
· Danger code (Kemler): 58
· UN-Number: 2014
· Packaging group: II
· Label: 5.1+8
· Description of goods: 2014 HYDROGEN PEROXIDE, AQUEOUS SOLUTION
· Remarks: with not less than 20 % but not more than 60 % hydrogen peroxide

(stabilized as necessary)
Limited quantitiy: 500 ml inner packaging, 30 kg gross packaging unit

· Maritime transport IMDG:

· IMDG Class: 5.1
· UN Number: 2014
· Label: 5.1+8
· Packaging group: II
· EMS Number: F-H,S-Q
· Remarks: with not less than 20 % but not more than 60 % hydrogen peroxide

(stabilized as necessary)

· Air transport ICAO-TI and IATA-DGR:

· ICAO/IATA Class: 5.1
· UN/ID Number: 2014
· Label: 5.1+8
· Packaging group: II
· Remarks: Transport by aircraft is forbidden!!

Air transport of hydrogen peroxide aqueous solution with more than 40 % but 60 % or less hydrogene
peroxide (stabilized as necessary) is forbidden!

· Transport/Additional information: Heat sensitive

* 15 Regulations
· Markings according to EC guidelines:

The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials
(Contd. on page 9)


Similer Documents