Download MobileCam/Light Pro Quick Installation Guide - SIIG, Inc. PDF

TitleMobileCam/Light Pro Quick Installation Guide - SIIG, Inc.
LanguageEnglish
File Size43.9 KB
Total Pages12
Document Text Contents
Page 1

1

MobileCam/Light Pro
Quick Installation Guide

System Requirements

• Pentium-class notebook or desktop computer
with an available USB port

• Windows 98SE/ME/2000/XP/Server 2003

Package Contents

• MobileCam/Light Pro

• USB extension cable (3ft.)

• Driver/Utility CD

• This quick installation guide

Serial # Sticker

For future product return or exchange, this serial # is
required. Please keep it for your reference.

04-0305B

Page 2

2

Layout

Figure 1. MobileCam/Light Pro Layout

MobileCam/Light Pro Buttons

• On/Off Light Button: Press the button on the
back of the MobileCam/Light Pro to activate/
deactivate the light.

• Snapshot Button: Press the button on the side
of the MobileCam/Light Pro to take a snapshot.

Snapshot
Button

On/Off Light
Button

(on the back) Light

Lens
(turn to focus)

To USB
Port

Page 6

6

Windows 2000/XP/Server 2003: Right click My
Computer , then click Manage. Click Device
Manager .

2. Double click Imaging Device(s) option and
USB PC Camera with Mic... should be
displayed.

Sound

The MobileCam/Light Pro comes with a built-in
microphone. If you need this function, use the
directions in this section to configure the microphone's
recording level.

Windows 98SE

1. In Control Panel , double click Multimedia , then
click Audio tab.

2. In Recording , select USB Audio (Microphone)
as the preferred device.

3. Click the microphone icon, move the slider bar
up to increase the recording level.

4. Close the open windows when finished.

Windows ME/2000

1. In Control Panel , double click Sounds and
Multimedia , then click Audio tab.

Page 7

7

2. In Sound Recording , select USB Audio Device
as the preferred device.

3. Click Volume , move the slider bar up to increase
the recording level.

4. Close the open windows when finished.

Windows XP/Server 2003

1. In Control Panel , double click Sounds and
Audio Devices , then click Audio tab.

2. In Sound recording , select PC Camera as the
preferred device.

3. Click Volume , move the slider bar up to increase
the recording level.

4. Close the open windows when finished.

AMCAP

Use this utility to easily capture video and snapshots.

Video capture

Windows 98SE/ME/2000

1. Click Start, Programs, USB PC Camera Plus,
then AMCAP .

Page 11

11

4. Click the down arrow next to the Output Size
box, and select 640 X 480, click OK .

Ulead Photo Explorer 7.0 SE Platinum

Ulead Photo Explorer combines easy to use tools for
acquiring, viewing, organizing, adjusting, and
sharing digital images. For more detail about Ulead
Photo Explorer, please refer to the PDF manual located
in CD-ROM :\ Ulead Photo Explorer7.0SE Platinum
\ Document \ Manual folder of the software CD.

Please note that this utility is optional and not needed
for the MobileCam/Light Pro to operate.

1. Boot up to Windows and insert the driver CD.

2. Click Start, Run. Type in D:\Ulead\setup.exe ,
then click OK . (Change D: to match your
CD-ROM drive letter)

3. Follow the on-screen instructions to install the
software.

4. When prompted, enter the Ulead serial number
found on the driver CD sleeve to complete the
installation.

Page 12

Technical Support
QUESTIONS? SIIG’s Online Support has the answers!
Simply visit our web site at www.siig.com and click on
Support. Our online support database is updated daily
with new drivers and solutions. The answers to your
problems could be just a few clicks away.

PRODUCT NAME
MobileCam/Light Pro

FCC RULES: TESTED TO COMPLY WITH FCC PART
15, CLASS B OPERATING ENVIRONMENT: FOR
HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.

THE PARTY RESPONSIBLE FOR
PRODUCT COMPLIANCE

SIIG, Inc.
6078 Stewart Ave.

Fremont, CA 94538-3152

MobileCam/Light Pro is a trademark of SIIG, Inc. All other names
used in this publication are for identification only and may be
trademarks of their respective companies.

June, 2006 Copyright ©2006 by SIIG, Inc.

Similer Documents