Download Manual de Servico Positivo z85 Clevo 6 71 m74s0 d05a Ou w76xs 6 7p m74sa 001 PDF

TitleManual de Servico Positivo z85 Clevo 6 71 m74s0 d05a Ou w76xs 6 7p m74sa 001
File Size4.4 MB
Total Pages94
Table of Contents
                            Manual
	Introduction 1-1
	Disassembly 2-1
		Notice
			Trademarks
			About this Manual
			IMPORTANT SAFETY INSTRUCTIONS
				CAUTION
				This Computer’s Optical Device is a Laser Class 1 Product
			Instructions for Care and Operation
			Power Safety
			Battery Precautions
			Battery Guidelines
				Related Documents
	Chapter 1: Introduction
		Overview
		System Specifications
		External Locator - Top View with LCD Panel Open
		External Locator - Front & Right side Views
		External Locator - Left Side & Rear View
		External Locator - Bottom View
		Mainboard Overview - Top (Key Parts)
		Mainboard Overview - Bottom (Key Parts)
		Mainboard Overview - Top (Connectors)
		Mainboard Overview - Bottom (Connectors)
	Chapter 2: Disassembly
		Overview
		Maintenance Tools
		Connections
		Maintenance Precautions
			Cleaning
		Disassembly Steps
			To remove the Battery:
				1. Remove the battery page 2 - 5
			To remove the HDD:
				1. Remove the battery page 2 - 5
				2. Remove the HDD page 2 - 6
			To remove the Optical Device:
				1. Remove the battery page 2 - 5
				2. Remove the Optical device page 2 - 8
			To remove the System Memory:
				1. Remove the battery page 2 - 5
				2. Remove the system memory page 2 - 9
			To remove the Inverter Board:
				1. Remove the battery page 2 - 5
				2. Remove the inverter board page 2 - 11
			To remove and install a Processor:
				1. Remove the battery page 2 - 5
				2. Remove the processor page 2 - 12
				3. Install the processor page 2 - 14
			To remove the Wireless LAN Module:
				1. Remove the battery page 2 - 5
				2. Remove the wireless LAN page 2 - 15
				1. Remove the battery page 2 - 5
				2. Remove the Bluetooth page 2 - 16
			To remove the Keyboard:
				1. Remove the battery page 2 - 5
				2. Remove the keyboard page 2 - 17
			To remove the Modem:
				1. Remove the battery page 2 - 5
				2. Remove the HDD page 2 - 6
				3. Remove the Optical device page 2 - 8
				4. Remove the processor page 2 - 12
				5. Remove the keyboard page 2 - 17
				6. Remove the modem page 2 - 18
		Removing the Battery
			1
			2
			6
			4
			3
		Removing the Hard Disk Drive
			Hard Disk Upgrade Process
				1
				2
				6
				4
				5
				6
				6
				6
		Removing the Optical (CD/DVD) Device
			1
			2
			6
			4
			6
			5
		Removing the System Memory (RAM)
			Memory Upgrade Process
				1
				2
				4
				5
				1
				6
				7
				8
		Removing the Inverter Board
			1
			6
			7
			8
			9
			10
			11
			11
		Removing and Installing the Processor
			Processor Removal Procedure
				3
				2
				1
				4
				4
			Processor Installation Procedure
				A
				B
				C
				D
				1
				2
				3
		Removing the Wireless LAN Module
			1
			2
			3
			4
			5
			5
		Removing the Bluetooth Module
			1
			2
			3
			4
			5
		Removing the Keyboard
			2
			3
			5
			4
			5
			6
			10
			11
			12
			13
			4
		Removing the Modem
			1
			21
			22
			23
			24
			27
			28
			29
			31
			32
			33
			34
			35
			36
	Appendix A: Part Lists
		Part List Illustration Location
		Top without Fingerprint (W760S)
			Figure A - 1 Top with Fingerprint
		Top without Fingerprint (W765S)
			Figure A - 2 Top with Fingerprint
		Bottom
			Figure A - 3 Bottom
		LCD
			Figure A - 4 LCD
		HDD
			Figure A - 5 HDD
		SATA DVD SUPER-MULTI
			Figure A - 6 SATA DVD SUPER- MULTI
	Appendix B: Schematic Diagrams
		System Block Diagram
			Sheet 1 of 38 System Block Diagram
		Penryn (Socket-P) 1/2
			Sheet 2 of 38 Penryn (Socket-P) 1/2
		Penryn (Socket-P) 2/2
			Sheet 3 of 38 Penryn (Socket-P) 2/2
		SiSM672 Host, PCIE 1/5
			Sheet 4 of 38 SiSM672 Host, PCIE 1/5
		SiSM672 DRAM 2/5
			Sheet 5 of 38 SiSM672 DRAM 2/5
		SiSM672 MuTIOL VGA 3/5
			Sheet 6 of 38 SiSM672 MuTIOL VGA 3/5
		SiSM672 PWR 4/5
			Sheet 7 of 38 SiSM672 PWR 4/5
		SiSM672 GND 5/5
			Sheet 8 of 38 SiSM672 GND 5/5
		DDRII SO-DIMM - 1
			Sheet 9 of 38 DDRII SO-DIMM - 1
		DDRII SO-DIMM - 2
			Sheet 10 of 38 DDRII SO-DIMM - 2
		SiS307ELV
			Sheet 11 of 38 SiS307ELV
		Panel, CRT
			Sheet 12 of 38 Panel, CRT
		Inverter, Bluetooth, Fan
			Sheet 13 of 38 Inverter, Bluetooth, Fan
		968 PCI, IDE, MuTIOL, SPI 1/4
			Sheet 14 of 38 968 PCI, IDE, MuTIOL, SPI 1/4
		968 PCIE, LAN, GPIO 2/4
			Sheet 15 of 38 968 PCIE, LAN, GPIO 2/4
		968 USB SATA 3/4
			Sheet 16 of 38 968 USB SATA 3/4
		968 PWR, GND 4/4
			Sheet 17 of 38 968 PWR, GND 4/4
		Clock Generator & Clock Buffer
			Sheet 18 of 38 Clock Generator & Clock Buffer
		PHY Realtek 8201CL
			Sheet 19 of 38 PHY Realtek 8201CL
		KBC ITE8512E
			Sheet 20 of 38 KBC ITE8512E
		JMB385, Card Reader
			Sheet 21 of 38 JMB385, Card Reader
		Audio Codec ALC662
			Sheet 22 of 38 Audio Codec ALC662
		Audio AMP
			Sheet 23 of 38 Audio AMP
		SATA HDD, PWR, LID
			Sheet 24 of 38 SATA HDD, PWR, LID
		Multi I/O, ODD, 3G, Click BD for M74
			Sheet 25 of 38 Multi I/O, ODD, 3G, Click BD for M74
		New Card, Mini PCIE, USB
			Sheet 26 of 38 New Card, Mini PCIE, USB
		LED, PC Beep, TP, FP
			Sheet 27 of 38 LED, PC Beep, TP, FP
		System/Ext-VGA Power
			Sheet 28 of 38 System/Ext-VGA Power
		AC-IN, Charger
			Sheet 29 of 38 AC-IN, Charger
		VCORE
			Sheet 30 of 38 VCORE
		VDD3, VDD5)
			Sheet 31 of 38 VDD3, VDD5
		1.05VS, 1.2V, 1.5V
			Sheet 32 of 38 1.05VS, 1.2V, 1.5V
		1.8V, 0.9VS
			Sheet 33 of 38 1.8V, 0.9VS
		Click BD, Finger BD for M76
			Sheet 34 of 38 Click BD, Finger BD for M76
		Multi Function Board
			Sheet 35 of 38 Multi Function Board
		Audio Board
			Sheet 36 of 38 Audio Board
		Power Switch Board for M74
			Sheet 37 of 38 Power Switch Board for M74
		External ODD Board for W76
			Sheet 38 of 38 External ODD Board for W76
	Appendix C: Updating the FLASH ROM BIOS
		To update the FLASH ROM BIOS you must:
			Download the BIOS
			Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive
			Set the computer to boot from the external drive
			Use the flash tools to update the BIOS
			Restart the computer (booting from the HDD)
				Your computer is now running normally with the updated BIOS
                        
Document Text Contents
Page 1

W760S_765S_service_cover.eps

Page 47

17.eps


Part Lists
A

.P
art Lists
Top without Fingerprint (W760S)

無鉛

無鉛

無鉛

長騰 無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

(非耐落) 無鉛

藍天 互億 無鉛

無鉛

無鉛

無鉛

無鉛

(非耐落) 無鉛

無鉛

無鉛

Figure A - 1
Top with

Fingerprint
Top without Fingerprint (W760S) A - 3

Page 48

22.eps


Part Lists
A

.P
ar

t L
is

ts
Top without Fingerprint (W765S)

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

無鉛

(非耐落) 無鉛

藍天 互億 無鉛

無鉛

無鉛

無鉛

無鉛

(非耐落) 無鉛

無鉛

Figure A - 2
Top with

Fingerprint
A - 4 Top without Fingerprint (W765S)

Page 93

W760TUN KB _hot key plate remove.eps


BIOS Update
C

:B
IO

S
U

pdate
Appendix C:Updating the FLASH ROM BIOS
To update the FLASH ROM BIOS you must:
• Download the BIOS update from the web site.
• Unzip the files onto a bootable CD/DVD/USB Flash Drive.
• Reboot your computer from an external CD/DVD/USB Flash Drive.
• Use the flash tools to update the flash BIOS using the commands indicated below.
• Restart the computer booting from the HDD and press F2 at startup enter the BIOS.
• Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer.
• After rebooting the computer you may restart the computer again and make any required changes to the default BIOS

settings.

Download the BIOS
1. Go to www.clevo.com.tw and point to E-Services and click E-Channel.
2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files

(the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model
(see sidebar for important information on BIOS versions).

Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive
1. Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the

downloaded files.
2. Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB

flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software).

Set the computer to boot from the external drive
1. With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the

computer and press F2 (in most cases) to enter the BIOS.
2. Use the arrow keys to highlight the Boot menu.
3. Use the “+” and “-” keys to move boot devices up and down the priority order.
4. Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS.
5. Press F10 to save any changes you have made and exit the BIOS to restart the computer.

BIOS Version

Make sure you down-
load the latest correct
version of the BIOS ap-
propriate for the com-
puter model you are
working on.

You should only
download BIOS ver-
sions that are
V1.01.XX or higher as
appropriate for your
computer model.

Note that BIOS versions
are not backward com-
patible and therefore
you may not down-
grade your BIOS to an
older version after up-
grading to a later ver-
sion (e.g if you upgrade
a BIOS to ver 1.01.05,
you MAY NOT then go
back and flash the BIOS
to ver 1.01.04).
C - 1

Page 94

W760TUN KB _hot key plate remove.eps


BIOS Update
C

:B
IO

S
U

pd
at

e

Use the flash tools to update the BIOS
1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you

see the message “Starting MS-DOS”. You will then be prompted to give “Y” or “N” responses to the programs
being loaded by DOS. Choose “N” for any memory management programs.

2. You should now be at the DOS prompt e.g: DISK C:\> (C is the designated drive letter for the CD/DVD drive/USB
flash drive).

3. Type the following command at the DOS prompt:

C:\> XXX.bat

4. The utility will then proceed to flash the BIOS.
5. You should then be prompted to press any key to restart the system or turn the power off, and then on again but

make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer
restarts.

Restart the computer (booting from the HDD)
1. With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from

the HDD.
2. Press F2 as the computer restarts to enter the BIOS.
3. Use the arrow keys to highlight the Exit menu.
4. Select Load Setup Defaults (or press F9) and select “Yes” to confirm the selection.
5. Press F10 to save any changes you have made and exit the BIOS to restart the computer.

Your computer is now running normally with the updated BIOS
You may now enter the BIOS and make any changes you require to the default settings.
C - 2

Similer Documents